Categories
Diaroc Grinding Pin for DTH Hammer Bits
pneunatic buttong bits grinding machine.
A full spares back-up service is also available. Also produce the grinding pins/cups, available with a choice of Hemispherical, Ballistic Semi Ballistic, Paraboloid or Conical pins, in sizes 7mm to 25mm.
Other sizes available on request.
Jan 24th,2024
2341 Views
Button bits grinding pin & cups from 7mm to 25mmwe design and produce the BTON200,BTON500 and Pneumatic Robot Arm AGM18 etc. pneunatic buttong bits grinding machine.A full spares back-up service is also available. Also produce the grinding pins/cups, available with a choice of Hemispherical, Ballistic Semi Ballistic, Paraboloid or Conical pins, in sizes 7mm to 25mm.Other sizes available on request.PREVENTION MEASURES AND INSTRUSTIONS FOR MACHINES OPERATORSBEFORE USE:Check that the machine is stable and that the grinder is correctly and tightly fitted to the machine.Check the integrity of the guards protecting parts in motion.DURING USE:Report immediately any inappropriate functioning or dangerous situations;The operator's position needs to be such as not to be in contact with the parts in movement;Do not remove or modify protection devices;Do not intervene on mobile parts during the functioning of the machine;Do not get distracted.AFTER USE:Correctly position the machine without leaving the tool suspended;Carry out the review and maintenance operations needed to reuse the machine with the power supply disconnected;In the maintenance operations comply with the indications of this manual;Clean the machine.Diamond Grinding Cups1.Wing (shoulder) drive grinding cup for, with a 8mm diameter shaft(shank) and one O-ring. Suitable for Atlas Copco LSD machines, Jasco, Dorey and KING PIN grinding machine.2.San drive grinding cup, with a 9mm diameter shaft(shank), suitable for all grinding machines.3.55 drive grinding cup is for all Atlas grinding machines.4.Internal hex drive grinding cup is for all CME grinding machines.
| Item |
Size(mm) |
| For button sharpening |
6/7/8/9/10/11/12/13/14/15/16/17/18/19/20/21/22/23/24/25 |
| For steel removing |
7-8, 9-10, 11-12, 13-14, 15-16, 17-18, 19-20 |
| Profile |
Semi-ballistic/Hemi-spherical |
All series button bit grinding machine.
1.Hand-held button bit grinder BTON200
| Machine Model |
BTON200 |
| Air pressure, max |
5-7 bar (100psi) |
| Air consumption |
2m3/min (50ft3/min) |
| Rate power |
1.5kw |
| Idling speed |
20,000 rpm |
Water flushing
presuure, max |
4 bar (60psi) |
| Hose diameter, air |
19 mm(1/2″) |
| Hose diameter, water |
4mm |
| Weight, exclude hoses |
3.2 kg |
| Sound level |
80 dB |
| Grinding button size |
Φ7-25 mm |
2.Semi-automatic Button Bit Grinder BTON500
| Machine Model |
BTON500 |
| Rotation speed: |
20000 rpm |
| Motor: |
Pneumatic (air powered) |
| Work pressure: |
5-7 bar (100 psi) |
| Max. air pressure: |
8 bar (115 psi) |
| Air consumption: |
2.0 m3 / min (80ft3/min) |
| Max. water pressure: |
4 bar (60 psi) |
| Air hose diameter: |
19 mm |
| Water hose diameter: |
6 mm |
| Weight excl. packaging: |
120 Kg |
| Weight incl. packaging: |
130 Kg |
| Packing dimensions: |
500*500*1400mm |
| Sound level: |
92 dB(A) |
3.Pneumatic Robot Arm Grinder - AGM18
| Machine Model |
AGM18 |
| Rotation speed: |
20000 rpm |
| Motor: |
Pneumatic (air powered) |
| Work pressure: |
5-7 bar (100 psi) |
| Max. air pressure: |
8 bar (115 psi) |
| Air consumption: |
2.0 m3 / min (80ft3/min) |
| Max. water pressure: |
4 bar (60 psi) |
| Air hose diameter: |
19 mm |
| Water hose diameter: |
6 mm |
| Weight excl. packaging: |
330 Kg |
| Weight incl. packaging: |
350 Kg |
| Packing dimensions: |
1600*700*1500mm |
| Sound level: |
92 dB(A) |
